Audio Technica AT2050 | Μικρόφωνα Μεγάλου Διαφράγματος

Χαρακτηριστικά

Audio Technica AT2050 | Μικρόφωνα Μεγάλου Διαφράγματος

AT2050 INCREDIBLE FLEXIBILITY, RELIABILITY AND CONSISTENCY The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. High performance and reliability Large dual diaphragm capsule for smooth, natural sound and low noise Three switchable polar patterns: omni, cardioid, figure-of-eight State-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standards Switchable 80 Hz high-pass filter and 10 dB pad Very versatile; ideal for voice, percussion, strings, amps, and drum kits Robust metal construction with enhanced protection grille for excellent protection of the capsule “Dual diaphragm capsule” The dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. “multi-directivity” The AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings, that give it great versatility, depending on the type of recording and the sound source to capture. “Switchable low cut and fader” An integral 80Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high pass position reduces the microphone's sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations. Element : Externally-polarized (DC bias) condenser Polar Pattern : Cardioid, Omnidirectional, Figure-of-Eight, Multi-Pattern Frequency Response : 20 - 20,000 Hz Open Circuit Sensitivity : -42 dB (7.9 mV) re 1V at 1 Pa Impedance : 120 ohms Maximum Input Sound Level : 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) Low Frequency Roll Off : 80 Hz, 12 dB/octave Dynamic Range : 136 dB, 1 kHz at Max SPL Signal-to-Noise Ratio : 77 dB, 1 kHz at 1 Pa Phantom Power Requirements :11-52V DC, 4.7 mA typical Weight :412g Dimensions : 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter Output Connector :Integral 3-pin XLRM-type Accessories Included : AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch