TAD 7025-WB HighGrade Premium Selection - Matched Pair | TAD Premium Tubes

 

TAD 7025-WB Highgrade PREMIUM Selected

a low noise, super low microphonic selected  version of the 12AX7 that meets all specifications required for the tube to be designated 7025 and SPAX7®

 

The TAD 7025WB Highgrade is tested and meticulously selected for the lowest noise and microphonics for use in the critical first preamp stages of High-Gain guitar amplifiers where noise and microphonics could be an issue.
The Tube Amp Doctor 7025 WB Highgrade has a balanced tone with an little emphasis on the upper mid-range that gives a nice string attack and clarity to the sound while retaining a strong and defined bottom end. The 7025WB Highgrade will also do equally well in vintage guitar amplifiers.

 

If the 7025 WB is used in sensitive phono preamps the tube adds freshness to the signal without being harsh or spiky.

 

The TAD 7025 Highgrade can replace any ECC83, E83CC, ECC803S, 12AX7, 12AX7A, 12AX7M, SPAX7®, 12AX7WA/WB/WC/LPS/EH, 5751, 7025, CV492 and CV4004.

 

Compared to the RT030 and RT010, the RT093-HG shows a little more edge in the high-mid range. As a result, it asserts itself tonally very well, which makes perfect sense in a band structure.

RT030 is emphasising the midrange a bit more and thus brings more warmth and a little less brilliance and depth definition than the RT010 and RT093-HG.

Due to their tonal structure the RT093-HG and the RT030 are even less prone to microphonics than the RT010 which qualifies for use with extremely microphonic-critical amps.

 

 

 

Q: When does a preamp tube become a Premium Selected tube?

 

A: All preamp tubes labeled Premium Selected have passed the following tests:

-      Low Noise Test

-      Microphonic Test

-      Gain Test

-      Sonic Tests

-      Shock Tests

-      Listening Tests

-      Balanced Output Test

 

But only those tubes which pass these tests best are labeled Highgrades.Typically this is approx. 3-10% from a production batch that qualifies for the HIGHGRADE rating from TAD.

Due to the very high selection requirements, this article is temporarily only available to a limited extent! Please note our shop-information on availability.

 

Matching in Pairs for preamp tubes means that two tubes show identical gain, hence, four characteristically identical systems.

This matching method includes our Balance-Selection. We highly recommend this matching method for hi-fi systems and all stereo applications.