TAD EFX-KIT-SC Discrete Hi-Voltage Effects Loop for Tube Amps | Sets + Kits

Offers a low noise non clipping high voltage discrete buffer and return gain stage optimized for insertion between your preamp and driver stages. Installation requires 4 wires, power ground input and output.

The stock setup offers a send with 10dB of cut and a return stage with 16dB of boost. The signal path can be reconfigured with panel mount pots, or trim pots (not included) or by changing component values on the board for a modified fixed installation.

 

The stock board has been well tested in JTM45 and JCM800 installations and is quiet and highly functional.

 

Wire is not included since you will probably want to use cloth covered wire in Fender installations and PVC coated wire in Marshall amps. Our installations did not require the use of shielded wire.